The Network Path Was Not Found

When trying to connect to a network resource on another Microsoft Windows computer, the initiating user might see this error message (Windows 7 error code 0x80070035) appear on their device:

The Network Path Cannot Be Found

Any of several different technical issues on a network can cause this error. Try the troubleshooting approaches below to either resolve or work around this problem.

Use Valid File and Folder (Path) Names

Error 0x80070035 can occur when the network itself is working as designed but users make mistakes in typing in the network path name.

The path specified must point to a valid shared resource on the remote device. Windows file and/or printer sharing must be enabled on the remote device and the remote user given permission to access the resource. See also: How to Enable or Disable Windows File and Printer Sharing.

Other Specific Failure Conditions

Unusual system behavior including Network Path Cannot Be Found Errors can occur when computer clocks are set to different times. Keep Windows devices on a local network synchronized via Network Time Protocol (NTP) if possible.

Ensure that valid usernames and passwords are used when connecting to remote resources.

If any of the Microsoft system services related to File and Printer Sharing for Microsoft Networks fail, various errors can result. Rebooting the computer may be necessary to restore normal functionality.

Disable Local Firewalls

A misconfigured or misbehaving software firewall running on the initiating Windows device can cause this issue.

Temporarily disabling these firewalls (either the built-in Windows Firewall or third-party firewall software) allows a person to test whether running without it has any bearing on the error.  If it does, extra steps should be taken to change the firewall settings to avoid this error so that it can be re-enabled if necessary.

Note that home desktop PCs protected behind a broadband router firewall do not require their own firewall at the samee time, but mobile devices that can be taken away from home should generally keep their firewall active.

Reset TCP/IP

While average users need not get involved with the low level technical details of how an operating system works, power users like to be familiar with the more advanced troubleshooting options available. A popular method for workaround occasional glitches with Windows networking involves resetting the components of Windows running in the background that support TCP/IP network traffic.

While the exact procedure varies depending on Windows version, the approach generally involves opening a Windows command prompt and entering 'netsh' commands. For example, the command

netsh int ip reset 

Resets TCP/IP on Windows 8 and Windows 8.1. Rebooting the operating system after issuing this command is also required in order to return Windows to a clean state.

For more, see: How to Reset TCP/IP by using the NetShell Utility